Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Gently pull the battery adhesive tab upward and away from the battery, allowingstraight upward.
[* black] To avoid tearing
the adhesive strip be careful not to slowly slide out from betweenpull against the battery and the rear caseor lower components.
[* black] Continue pulling the adhesive tab until you feel increased resistance, and then stop.
[*
icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If any of the adhesive strips break off underneath the battery and cannot be retrieved, '''skip to step 25'''.
[* black] Gently pull the battery adhesive tab upward and away from the battery, allowingstraight upward.
[* black] To avoid tearing
the adhesive strip be careful not to slowly slide out from betweenpull against the battery and the rear caseor lower components.
[* black] Continue pulling the adhesive tab until you feel increased resistance, and then stop.
[*
icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If any of the adhesive strips break off underneath the battery and cannot be retrieved, '''skip to step 25'''.