Skip to main content

Changes to Step #21

Edit by Walter Galan

Edit approved by Walter Galan


Step Lines

[* black] Back of the logic board.
[* red] SK Hynix [|H2JTDG8UD1BMS|new_window=true] 128 Gb (16 GB) NAND Flash
- [* orange] Murata 339S0228 WiFi Module
- [* yellow] Apple/Dialog 338S1251-AZ power management IC
- [* green] Broadcom [link||BCM5976|new_window=true] touchscreen controller
- [* blue] M8 motion coprocessor (NXP [|LPC18B1UK|new_window=true])
- [* violet] NXP 65V10 NFC module + Secure Element. Most likely contains a NXP [|PN544|new_window=true] NFC controller inside.
- [* black] Qualcomm [|WTR1625L|new_window=true] RF transceiver
+ [* orange] Murata 339S0228 Wi-Fi Module
+ [* yellow] Apple/Dialog 338S1251-AZ Power Management IC
+ [* green] Broadcom [link||BCM5976|new_window=true] Touchscreen Controller
+ [* blue] NXP [|LPC18B1UK|new_window=true] ARM Cortex-M3 Microcontrollers (also known as the M8 Motion Coprocessor)
+ [* violet] NXP 65V10 NFC module + Secure Element (Most likely contains an NXP [|PN544|new_window=true] NFC controller inside)
+ [* black] Qualcomm [|WTR1625L|new_window=true] RF Transceiver