Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] You can take off the keypad now, this is sitting loose on top of the sensors.
[* red] Unscrew the four remaining T6 Torx screws with, again, a Torx T6 screwdriversscrews.
[* red] Unscrew the four remaining T6 Torx screws with, again, a Torx T6 screwdriversscrews.
[* icon_note] The screws holding the motherboard in place are different from the two previous screws which held the rear cover in place.