Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] You can take off the keypad now, this is sitting loose on top of the sensors.
[* blackred] Unscrew the four remaining Torx screws with, again, a Torx T6 screwdrivers. NOTE:
[* icon_note]
The screws holding the motherboard in place are different from the two previous screwscrews which held the rear cover in place.
[* black] These screws are very fragile, so don't use an ordinary screwdriver! A magnetic screwdriver is recommended, this way you don't loose the screws and it's easier to get them back in.
[* blackred] Unscrew the four remaining Torx screws with, again, a Torx T6 screwdrivers. NOTE:
[* icon_note]
The screws holding the motherboard in place are different from the two previous screwscrews which held the rear cover in place.
[* black] These screws are very fragile, so don't use an ordinary screwdriver! A magnetic screwdriver is recommended, this way you don't loose the screws and it's easier to get them back in.