Skip to main content

Changes to Step #3

Edit by Richdave

Pending approval

Before
After
Unchanged

Step Lines

-[* icon_caution] Lift the plate and lower fan off the heat sink being careful not to damage the lower fan cable which is attached to the logic board
-[* green] Disconnect the lower fan connector from the logic board
+[* icon_caution] Lift the plate and lower fan off the heat sink being careful not to damage the lower fan cable, which is attached to the motherboard.
+[* green] Disconnect the lower fan connector from the motherboard.
[* black] Remove the metal plate and lower fan.
-[* icon_note] The lower fan will easily separate from the metal plate
+[* icon_note] The lower fan will easily separate from the metal plate.