Skip to main content

Changes to Step #3

Edit by Marty Rippens

Edit approved by Marty Rippens

Before
After
Unchanged

Step Lines

[* icon_caution] Lift the plate and lower fan off the heat sink being careful not to damage the lower fan cable, which is attached to the motherboard.
-[* green] Disconnect the lower fan connector from the motherboard.
+[* red] Disconnect the lower fan connector from the motherboard.
[* black] Remove the metal plate and lower fan.
[* icon_note] The lower fan will easily separate from the metal plate.

Image 1

Old Version

New Version