Skip to main content

Changes to Step #2

Edit by john

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] Two 3 mm Phillips #00.
+ [* red] Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.