Skip to main content

Changes to Step #2

Edit by podly ryszard

Edit declined by David Hodson

Before
After
Unchanged

Step Lines

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] Two 3 mm Phillips #00.
- [* orange] One 4 mm Phillips #00 on the right side.
+ [* red] Two 4 mm Phillips #00.
+ [* orange] One 3 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.