Skip to main content

Changes to Step #4

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

-[* black] Use the tip of a spudger to flip up the metal retaining bracket on the iSight camera cable located on the logic board.
+[* black] Flip up the metal retaining bracket up to unlatch the iSight camera cable connector on the logic board.
+[* black] Pull the iSight camera cable straight away from its connector on the logic board.
+[* icon_caution] This is a delicate connector that can easily be broken, be very careful when disconnecting and reconnecting the cable.

Image 3

No previous image

Added