Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #19

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* icon_note] To remove the upper component board you will be pulling gently on its cable while lifting it up enough to clear the battery, but not high enough to scrape against the rear case. Go slowly and carefully.
[* black] Insert the tip of a spudger under the upper component control board to lift it slightly.
[* black] Pull the board up and out of the space between the battery and the rear case bezel.
[* black] Remove the upper component control board.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added