Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #16

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Insert a spudger under the GPS connector end of the upper component board and lift it up off of its adhesive.
[* icon_caution] Be very careful not to scrape the board against the top of the rear case.
[* icon_reminder] The GPS antenna cable will slide out of its ZIF socket when you do this. On reassembly, fit the cable back into the socket as you replace the upper component board.