Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.
[* black] Use athe point of a spudger to loosen the right speaker cable's connector from its socket on the logic board.
[* icon_note] It is useful
to push downward on both short sideseither side of the right speaker cable connector to "walk" it out of its socket. Be careful withsocket on the corners of the connectors, they can be easily broken off.
[* black] Pull the connector downwards to remove it from its socket
logic board.