Skip to main content

Changes to Step #10

Edit by Carl Hauschke

Edit declined by Sam Goldheart

Deleted
Added
Unchanged

Step Lines

[* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it on end on thea table, as shown.
[* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it on end on thea table, as shown.
[* black] While holding the display with your left hand, remove the remaining T8 Torx screw from the upper display bracket.
[* icon_caution] Be sure the display and upper case are balanced and will not fall, potentially damaging each component.
[* black] Remove the last remaining T8 Torx screw securing the display to the upper case.