Changes to Step #10
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Deleted
- Added
- Unchanged
Step Lines
| [* icon_note] Open the MacBook Pro a little wider than 90 degrees, and place it on-end on the table, as shown. |
| [* black] While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the upper display bracket. |
| [* icon_caution] Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component. |
| [* black] Remove the last remaining T8 Torx screw securing the display to the upper case. |
Image 1
No previous image
Added
Image 2
No previous image
Added