Skip to main content

Changes to Step #25

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Open the MacBook Pro a little wider than 90 degrees, and place it on end, as shown.
+[* icon_reminder] Open the MacBook Pro a little wider than 90 degrees, and place it on end, as shown.
[* black] While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.
[* icon_caution] Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.
[* black] Remove the last remaining T8 Torx screw securing the display to the upper case.