Skip to main content

Changes to Step #10

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

[* black] Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.
[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
- [* black] Connect the long-sleeved cable to the center socket.
- [* black] The short-sleeved cable connects next to the screw.
- [* black] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.
+ [* red] Connect the long-sleeved cable to the center socket.
+ [* orange] The short-sleeved cable connects next to the screw.
+ [* yellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.