Skip to main content

Changes to Step #10

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

+[* black] Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.
+[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
+ [* black] Connect the long-sleeved cable to the center socket.
+ [* black] The short-sleeved cable connects next to the screw.
+ [* black] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added