Skip to main content

Changes to Step #3

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Pull the camera end of the motherboard up from the midframe to allow access to the connectors on the rear.
-[* icon_caution] Do not attempt to fully remove the motherboard it is still attached to the interior midframe by its daughterboard connector.
+[* black] Pull, but do ***not*** remove, the camera end of the motherboard up from the midframe to allow access to the connectors on the rear.
+[* icon_caution] Do ***not*** attempt to fully remove the motherboard as it is still attached to the interior midframe by the Micro-USB port daughterboard connector.