Skip to main content

Changes to Step #4

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* icon_note] In the following steps you will be using an opening pick to sever the adhesive securing the front panel glass. Only pry where directed, and if you experience resistance, stop sliding and reapply heat.
-[* black] Insert the tip of an opening pick under the right side of the front glass near the corner.
+[* icon_note] In the following steps you will be using an opening pick to separate the adhesive securing the front panel glass. Only pry where directed. If you experience resistance, stop sliding the opening pick and reapply heat.
+[* black] Insert the edge of an opening pick underneath the bottom right side of the front glass.