Skip to main content

Changes to Step #3

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* icon_note] In the following steps you will be using an iOpener to warm the adhesive securing the display to the rest of the phone. This will allow for a safer, easier screen removal. For iOpener use, follow our [guide|11677|iOpener heating guide], pay attention to all warnings.
+[* icon_note] In the following steps you will be using an iOpener to warm the adhesive affixing the display assembly to the rest of the phone. This will allow for a safer, easier screen removal. For proper iOpener use, follow our [guide|11677|iOpener heating guide], make sure to pay attention to all warnings.
[* black] Place a heated iOpener on the left side of the phone for at least 90 seconds.
[* black] Reheat the iOpener and place it on the right half of the phone.