Skip to main content

Changes to Step #6

Edit by Miroslav Djuric

Edit approved by Miroslav Djuric

Before
After
Unchanged

Step Lines

[* black] Cut the end off a cotton swab in order to transform it into an RTV applicator.
[* icon_note] Alternatively you can try removing all of the cotton from the swab, but you certainly ''do not want'' any cotton fibers to remain on the swab.
[* black] Dip the swab into the RTV silicone, and use it to apply the RTV silicone to the underside of the subwoofer tear.
-[* black] You do not need a huge amount of RTV silicone on either side of the rubber surround -- just enough to form a very thin layer.
+[* black] You do not need a huge amount of RTV silicone on either side of the rubber surround just enough to form a very thin layer.