Changes to Step #2
Edit by Jeff Stephens —
Edit approved by Jeff Stephens
- Before
- After
- Unchanged
Step Lines
| [* black] Heat the iOpener for ***thirty seconds***. | |
| [* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time. | |
| - | [* icon_caution] Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. |
| + | [* icon_caution] Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. Do not attempt to heat over 100˚C (212˚F). |
| [* icon_caution] Never touch the iOpener if it appears swollen. | |
| [* icon_caution] If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes. |