Fix Your Stuff Community Store

Changes to Step #2

Edit by Brett Hartt —

Edit approved by Brett Hartt

Before
After
Unchanged

Step Lines

-[* black] Heat the iOpener for ***one minute*** on the highest power setting.
+[* black] Heat the iOpener for ***one minute***.
[* black] If you are using one of the new, gel-filled iOpeners, heat the iOpener for only ***thirty seconds***.
[* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional minute at a time.
[* black] If you are using one of the new, gel-filled iOpeners, only reheat the iOpener for ***thirty seconds*** at a time.
[* icon_caution] Be careful not to overheat the iOpener during the repair. Always wait at least two minutes before reheating the iOpener.