Changes to Step #2
Edit by Brett Hartt —
Edit approved by Brett Hartt
- Before
- After
- Unchanged
Step Lines
| [* black] Heat the iOpener for '''one minute''' on the highest power setting. |
| [* black] If you are using one of the new, gel-filled iOpeners, heat the iOpener for only '''thirty seconds'''. |
| [* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional minute at a time. |
| [* black] If you are using one of the new, gel-filled iOpeners, only reheat the iOpener for '''thirty seconds''' at a time. [* icon_caution] Be careful not to overheat the iOpener during the repair. Always wait at least two minutes before reheating the iOpener. |
| [* black] If you are using one of the new, gel-filled iOpeners, only reheat the iOpener for '''thirty seconds''' at a time. [* icon_caution] Be careful not to overheat the iOpener during the repair. Always wait at least two minutes before reheating the iOpener. |