Fix Your Stuff Community Store

Changes to Step #2

Edit by Clay Eickemeyer —

Edit approved by Clay Eickemeyer

Before
After
Unchanged

Step Lines

-[* black] Heat the iOpener for ***thirty seconds***. More or less time may be necessary depending on how powerful your microwave is.
-[* black] The iOpener is sufficiently heated when it is barely too hot to touch. Do not heat it any hotter than that.
+[* black] Heat the iOpener for ***thirty seconds***.
+ [* icon_note] Depending on the wattage of your microwave, more or less time may be required. The iOpener is sufficiently heated when it's barely too hot to touch.
[* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.
[* icon_caution] Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. Do not attempt to heat over 100˚C (212˚F).
[* icon_caution] Never touch the iOpener if it appears swollen.
[* icon_caution] If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.