Changes to Step #2
Edit by A X —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| - | [* black] Heat the iOpener for ***thirty seconds***. |
|---|---|
| + | [* black] Heat the iOpener for ***thirty seconds***. More or less time may be necessary depending on how powerful your microwave is. |
| + | [* black] The iOpener is sufficiently heated when it is barely too hot to touch. Do not heat it any hotter than that. |
| [* black] Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time. | |
| [* icon_caution] Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. Do not attempt to heat over 100˚C (212˚F). | |
| [* icon_caution] Never touch the iOpener if it appears swollen. | |
| [* icon_caution] If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes. |