Skip to main content

Changes to Step #1

Edit by Brett Hartt

Edit approved by Brett Hartt

Before
After
Unchanged

Step Lines

[* icon_note] We recommend that you clean your microwave before proceeding, as any nasty gunk on the bottom may end up stuck to the iOpener.
[* black] Place the iOpener in the center of the microwave.
[* icon_caution] For carousel microwaves: Make sure the plate spins freely. If your iOpener gets stuck, it may overheat and burn.
[* icon_caution] If you have not used your iOpener for some time, or if you're using a new iOpener for the first time, microwave it wrapped in a damp paper towel. This will prevent it from burning if it is overheated.