Fix Your Stuff Community Store

Changes to Step #4

Edit by Arthur Shi —

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[title] Alternate heating method
+[title] Alternate iOpener heating method
[* icon_note] If you don't have a microwave, follow this step to heat your iOpener in boiling water.
[* black] Fill a pot or pan with enough water to fully submerge an iOpener.
[* black] Heat the water to a boil. ***Turn off the heat.***
[* black] Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.
[* black] Use tongs to extract the heated iOpener from the hot water.
[* black] Thoroughly dry the iOpener with a towel.
[* icon_caution] The iOpener will be very hot, so be careful to hold it only by the end tabs.
[* black] Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.