Skip to main content

Changes to Step #8

Edit by Justin Thomas

Edit approved by Justin Thomas

Deleted
Added
Unchanged

Step Lines

[* icon_caution] A ribbon wire connects the rear panel to the inside of the camera. Breaking this wire would make your rear screen and buttons non-functional.
[* black] Carefully use your fingers to tilt the back panel downward.
[* black] Use the flat end of the spudger to gently pry off the ribbon wire from the inside of the camera.
[* black] Use the flat end of the spudger to gently pry off the ribbon wire from the inside of the camera.
[* icon_note] It may be helpful to move the spudger from the left of the wire to the right when trying to remove it.