Skip to main content

Changes to Step #8

Edit by Justin Thomas

Edit approved by Justin Thomas

Deleted
Added
Unchanged

Step Lines

[* black] Remove the back panel.
[*
icon_caution] There is aA ribbon wire nearconnects the middlerear panel to the inside of the panel.camera. Breaking this wire would make your rear screen and buttons non-functional.
[* black] Carefully use your fingers to tilt the back panel downward.
[* black]
Use athe flat end of the spudger to carefullygently pry off the ribbon wire from the camera.
[* icon_note] It may be helpful to move the spudger from the left of the wire to the right when trying to
remove it.
[* black] Remove the back panel.
[*
icon_caution] There is aA ribbon wire nearconnects the middlerear panel to the inside of the panel.camera. Breaking this wire would make your rear screen and buttons non-functional.
[* black] Carefully use your fingers to tilt the back panel downward.
[* black]
Use athe flat end of the spudger to carefullygently pry off the ribbon wire from the camera.
[* icon_note] It may be helpful to move the spudger from the left of the wire to the right when trying to
remove it.