Skip to main content

Changes to Step #4

Edit by Justin Thomas

Edit approved by Justin Thomas

Deleted
Added
Unchanged

Step Lines

[* black] Open the covers to the HDMI/AV/MIC ports on the side of the camera and rotateby gently pulling outward on the bottom of the covers.
[* black] Rotate
the covers to the sideside so that you can see the connection ports inside.
[* black] Open the covers to the HDMI/AV/MIC ports on the side of the camera and rotateby gently pulling outward on the bottom of the covers.
[* black] Rotate
the covers to the sideside so that you can see the connection ports inside.
[* black] Remove the following screws:
[* red] Two silver 5mm Phillips #00
[* orange] One black 6mm Phillips #00