Skip to main content

Changes to Step #2

Edit by Jackson McKay

Edit approved by Jackson McKay

Deleted
Added
Unchanged

Step Lines

[* blackred] Remove the two #15mm screws holding the power and 3.5mm jack PCB onto the rest of the device; you will need a Phillips #1 driver to do this.
[* blackred] Remove the two #15mm screws holding the power and 3.5mm jack PCB onto the rest of the device; you will need a Phillips #1 driver to do this.
[* black] Lift the PCB away from the rest of the device.

Image 1

Old Version

New Version

Image 2

Old Version

New Version