Skip to main content

Changes to Step #2

Edit by Jerrell

Edit approved by Jerrell

Deleted
Added
Unchanged

Step Lines

[* black] Locate the power port and 3.5 mm audio adapter port. They should be sitting on a green printed circuit board (PCB) near the edge of the device. This PCB is what you want to replace.
[*
black] Remove the two #1 screws holding the power and 3.5mm jack PCB onto the rest of the device. Youdevice; you will need a Phillips #1 driver to do this.
[* black] Lift the PCB away from the rest of the device.
[* black] Locate the power port and 3.5 mm audio adapter port. They should be sitting on a green printed circuit board (PCB) near the edge of the device. This PCB is what you want to replace.
[*
black] Remove the two #1 screws holding the power and 3.5mm jack PCB onto the rest of the device. Youdevice; you will need a Phillips #1 driver to do this.
[* black] Lift the PCB away from the rest of the device.

Image 3

No previous image

Added