Skip to main content

Changes to Step #27

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* icon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. '''Be very careful''' not to cut the Lightning connector cable itself.
[* black] Insert an opening pick under the Lightning cable where it meets the logic board.
[* black] Slide the pick down and around the bend in the cable.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added