Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Remove the front panel assembly.
[* icon_noteicon_reminder] During reassembly, be sure to cleanwipe any dust or fingerprints off of the LCD screen and the inside of the front panel assembly. It willassembly to ensure a spec-free deviceclean display.
[* icon_noteicon_reminder] During reassembly, be sure to cleanwipe any dust or fingerprints off of the LCD screen and the inside of the front panel assembly. It willassembly to ensure a spec-free deviceclean display.
[* icon_reminder] During reassembly, to prevent "ghost" or "phantom" touch input issues with your iPad, check to make sure there is a layer of foam or tape covering the metal frame on the back of the glass.
[* red] These areas, which are part of the digitizer, are covered by foam adhesive on your iPad's original front panel. Some replacement panels leave this area exposed, which can cause it to ground out against other components. You can protect it by adding a layer of very thin insulating tape, such as [product|IF145-113-2|Kapton (polyimide) tape|new_window=true].