Skip to main content

Changes to Step #4

Edit by Robert Boyd

Edit approved by Robert Boyd


Step Lines

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.
+ [* icon_note] If you are having trouble fitting the battery blocker underneath the logic board, you can try [guide|143682|using a playing card] to disconnect the battery.