Skip to main content

Changes to Step #4

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
-[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
+[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.