Skip to main content

Changes to Step #4

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

-[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
+[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.