Skip to main content

Changes to Step #6

Edit by Maria

Edit approved by Maria

Deleted
Added
Unchanged

Step Lines

[* black] Turn the camera with the lens facing down.
[* black] Use the blue opening tool to make lever. Place it in the gap where the front cover and the back cover assemble.
[* icon_note] Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.
[*
icon_caution] CarfullyCarefully make pressure downwards on the opening tool so the cover can gradually open.
[* icon_note] Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.
[*
icon_caution] CarfullyCarefully make pressure downwards on the opening tool so the cover can gradually open.
[* black] Keep making pressure and slowly slide the opening tool through all the gap.
[* black] There is one point wherewhene the cover will dissasemble completlydisassemble completely.
[* icon_note] '''NOTE: ''' When you are dissasembelingdissembling the back cover, the DC IN A/V OUT DIGITAL cover will also dissasembledisassemble and fall off.
[* black] There is one point wherewhene the cover will dissasemble completlydisassemble completely.
[* icon_note] '''NOTE: ''' When you are dissasembelingdissembling the back cover, the DC IN A/V OUT DIGITAL cover will also dissasembledisassemble and fall off.