Skip to main content

Changes to Step #2

Edit by Chris

Edit approved by Chris

Before
After
Unchanged

Step Lines

-[* black] Remove the 17 4.5mm philips screws
-[* black] using the pry tool seperate the two halves of the laptop base.
-[* icon_caution] use caution when separating the laptop halves as they are still connected by two ribbon cables.
+[* black] Remove the 17 4.5mm philips screws on the bottom of the laptop.
+[* black] Using the pry tool separate the two halves of the laptop base.
+[* icon_caution] Use caution when separating the laptop halves as they are still connected by two ribbon cables.