Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #20

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
[* black] Leave the pick at the corner, do not pry any farther and do not remove the pick from the iPad.
[* icon_note] The third image shows the two antennas and the home button cavity in the lower case of the iPad.
[* black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Image 3

No previous image

Added