Skip to main content

Changes to Step #21

Edit by Alexander

Edit approved by Alexander

Before
After
Unchanged

Step Lines

[title] Solder the second LED
[* black] Repeat the steps taken previously.
[* black] Position the LED and bend one lead down to hold it in place.
[* black] Solder the other lead in place, then clip off the excess.
- [* black] Bend the first lead back up, then solder in place as well. Clip the lead when complete.
+ [* black] Bend the first lead back up, then solder in it place as well. Clip the lead when complete.