Skip to main content

Changes to Step #5

Edit by Brandon MacDonald

Edit approved by Brandon MacDonald

Deleted
Added
Unchanged

Step Lines

[* redblack] Now remove the the final four screws holding the screen in place.
[* redblack] Now remove the the final four screws holding the screen in place.
[* red] Remove the four 2.5mm X 6mm-L Phillips #0 screws from the lower left and right hand sides of the screen.
[* blackicon_caution] Be aware that the screen is now loose and set it gently facing down onto the keyboardcan fall backwards.
[* blackicon_caution] Be aware that the screen is now loose and set it gently facing down onto the keyboardcan fall backwards.