Skip to main content

Changes to Step #8

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart


Step Lines

[* black] Remove the following six screws securing the logic board to to the upper case:
[* red] One 3.1 mm T5 Torx screw
[* orange] One 2.5 mm T5 Torx screw
[* yellow] One 5.5 mm raised head silver T5 Torx screw
[* green] Two 5.7 mm T5 Torx screws
[* blue] One 3.8 mm silver T5 Torx screw