Skip to main content

Changes to Step #2

Edit by Nicholas Samokyszyn

Edit approved by Nicholas Samokyszyn

Deleted
Added
Unchanged

Step Lines

[* black] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all #14 phillips head, 8.2 mm screws and set them aside.
[* black] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all #14 phillips head, 8.2 mm screws and set them aside.
[* black] Lift the side of the blaster off exposing its internal parts.