Menu

Your Settings

Changes to Step #2

Edit by Kyle Schober —

Edit approved by Kyle Schober

Deleted
Added
Unchanged

Step Lines

[* blackorange] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
[* blackorange] Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.
[* black] Lift the side of the blaster off exposing its internal parts.

Image 1

Old Version

New Version