Skip to main content

Changes to Step #3

Edit by Kathryn Van Susante

Edit approved by Kathryn Van Susante

Deleted
Added
Unchanged

Step Lines

[* black] Unscrew the screw on the circuit board on the front of the camera (head 2.5 mm, lengthlength 3.5 mm)
[* black] Unscrew the screw on the circuit board on the front of the camera (head 2.5 mm, lengthlength 3.5 mm)
[* black] Unscrew the screw on the lower left part of the silver part of the back under where the LCD screen was.
[* black] Unscrew the screw on the top of the silver part of the back