Skip to main content

Changes to Step #2

Edit by Garrett Kissinger

Edit approved by Garrett Kissinger

Before
After
Unchanged

Step Lines

-[* black] Detach the two cords running to the wireless card and unscrew the screw holding in the card. They are shown highlighted in the picture.
-[* black] Pull the card out of its slot and insert the new card. Reatach the wires and reassemble the device.
+[* black] Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in the picture.
+[* black] Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.