Skip to main content

Changes to Step #2

Edit by Garrett Kissinger

Edit approved by Garrett Kissinger

Before
After
Unchanged

Step Lines

-[* black] Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in the picture.
+[* black] Locate the wireless card. It is shown highlighted in picture one.
+[* black] Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.
[* black] Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added