Skip to main content

Changes to Step #1

Edit by Kishan Patel

Edit approved by Kishan Patel

Deleted
Added
Unchanged

Step Lines

[* black] Hold front panel with both hands, with your thumbs on the metal dialdial axle. The dial axle is the metal rod that comes out from the middle of the white plastic rotating piece.
[* black] Firmly press down on the silver dial axle to separate the dial from the front panel. This is the part that is sticking up in the middle of the white plastic piece.
[* black] If this is difficult to do with your hands, push the silver dial axle against something hard, like the edge of a table.
[* black] Hold front panel with both hands, with your thumbs on the metal dialdial axle. The dial axle is the metal rod that comes out from the middle of the white plastic rotating piece.
[* black] Firmly press down on the silver dial axle to separate the dial from the front panel. This is the part that is sticking up in the middle of the white plastic piece.
[* black] If this is difficult to do with your hands, push the silver dial axle against something hard, like the edge of a table.